ISO 2597-2-2008 铁矿石.总铁含量的测定.第2部分:钛(III)氯化物还原后的滴定方法
时间:2024-05-16 15:10:01 来源: 标准资料网 作者：标准资料网 阅读：9750
【英文标准名称】:Ironores-Determinationoftotalironcontent-Part2:Titrimetricmethodsaftertitanium(III)chloridereduction
【原文标准名称】:铁矿石.总铁含量的测定.第2部分:钛(III)氯化物还原后的滴定方法
【标准号】:ISO2597-2-2008
【标准状态】:现行
【国别】:国际
【发布日期】:2008-11
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC102
【标准类型】:()
【标准水平】:()
【中文主题词】:化学分析和测试;含量测定;铁含量;铁矿石;实验室取样;数学计算;测量仪器;金属矿;矿石;还原;抽样方法;试验设备;试验报告;测试;滴定法;容量分析
【英文主题词】:Chemicalanalysisandtesting;Determinationofcontent;Ironcontent;Ironores;Laboratorysample;Mathematicalcalculations;Measuringinstruments;Metalliferousminerals;Ores;Reduction;Samplingmethods;Testequipment;Testreports;Testing;Titrimetry;Volumetricanalysis
【摘要】:
【中国标准分类号】:D31
【国际标准分类号】:73_060_10
【页数】:15P;A4
【正文语种】:英语
【英文标准名称】:StandardTestMethodforNonvolatileMatter(TotalSolids)inWater-EmulsionFloorPolishes,Solvent-BasedFloorPolishes,andPolymer-EmulsionFloorPolishes
【原文标准名称】:水乳液地板抛光剂、溶剂基地板抛光剂和聚合物乳液地板抛光剂中的不挥发物(总固体)的标准测试方法
【标准号】:ASTMD2834-1995
【标准状态】:现行
【国别】:美国
【发布日期】:1995
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:高聚物;试验;地板覆盖物;非挥发物测定;抛光剂;乳剂;溶剂
【英文主题词】:polymers;solvents;emulsions;polishes;floorcoverings;testing;non-volatilematterdetermination
【摘要】:
【中国标准分类号】:Y40
【国际标准分类号】:71_100_99
【页数】:2P;A4
【正文语种】:英语
Product Code:SAE J1100
Title:Motor Vehicle Dimensions
Issuing Committee:Human Accom And Design Devices Stds Comm
Scope:This SAE Recommended Practice defines a set of measurements and standard procedures for vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way.In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property.Unless otherwise specified, all dimensions are measured normal to the three-dimensional reference system (see SAE J182), except ground-related dimensions, which are defined normal to ground. All dimensions are taken with the vehicle at curb weight unless otherwise specified.All dimensions are measured on the base vehicle and do not include Regular Production Options (RPO) or accessory parts, unless otherwise specified.Although many terms and dimensions use human body parts in their name, they should not be construed as measures that indicate occupant accommodation, capabilities, or comfort.